Kanger CUPTI All-In-One 75W Kit Review

First Impression

The Kanger CUPTI All-In-One 75W is an all-in-one device meaning that the tank sits inside the mod rather than on top of it. It was meant to replace the Kanger NEBOX. Kanger made a number of improvements with this revision, and so while the tank is 5ml instead of 10ml, and the USB charging port is inconveniently on the bottom of the tank, we found that this version was greatly improved. The tank can be filled from the top, has adjustable airflow vents, has a wattage capacity that reaches 75W rather than just 60W, and comes with a replaceable glass plate for the tank. We at E-Cig Brands are huge fans of the new Kanger CUPTI, and we think you will be too.

Kanger CUPTI All-In-One 75W Starter Kit

Besides the Kanger Cupti All-In-One 75W mod itself, this starter kit will also come with two CLOCC coils–one stainless steel coil with a 0.5Ω coil and the other a Nickel Chromium 1.5Ω coil. You will also get a USB cable and a manual explaining everything you need to know to get started vaping the Kanger Cupti All-In-One 75W.

Specifications

• Wattage Output: 7W-75W
• Removable 18650 Battery (sold separately)
• Tank Capacity: 5ml
• Temperature Control Mode
• Comes with Replaceable Glass Section
• Optional RBA

Kanger CUPTI All-In-One Design & Features

Like all Kanger products, the Kanger CUPTI All-In-One 75W comes with battery covers so that, when you change the color of the battery, it will show through on the side where the company’s logo is cut out off the mod itself. The OLED display is located conveniently on the top of the tank next to the drip tip, and the battery pops out with a latch on the bottom. There is also a micro-USB port on the bottom of the tank, so if you prefer to charge your batteries inside the Kanger CUPTI you can. Otherwise, it’s easy to pop out the batteries and charge them separately in your own charger.

Performance

The Kanger Cupti All-In-One 75W can fire up to 75W, but even at 30W-35W it provides loads of vapor. We generally tend to vape on a 50/50 blend, and so we suspect that if you were to vape with a blend with a higher VG concentration, you’d get even bigger clouds.

Click for Lowest Price + 5% Off Now!

The Tank

The tinted glass tank rests inside the tank, and there is a window where you can monitor the e-liquid level. The glass tank is replaceable, so if it should break you can slide in another piece. There is a max fill line that is drawn across the center of the tank, and it may seem as if you can fill the tank up further. However, the atomizer does take up a good amount of room, so if you don’t want any leaking, don’t fill the tank up past this level. The tank is a top-filling tank, and so you can unscrew the top cap, fill it up, and then just replace the atomizer, which is connected to the drip tip.

Kanger CUPTI All-In-One Display & Menu

The OLED display on the Kanger CUPTI is located on the top of the mod next to the drip tip. It is relatively small given the space, so you might have a little difficulty reading the numbers if your eyes aren’t as sharp as they used to be. The fire button is located on the side of the mod, and the up and down buttons are right below the screen next to the drip tip. It displays wattage, voltage, and resistance settings on the main screen, and if you click the fire button three times, you can access temperature control mode in stainless steel. If you click it again, you can scroll through the different wire settings. You can hold down all three buttons to lock the device, and if you hold down the up and down buttons simultaneously, you can reverse the orientation of the screen so it is facing the other direction. Unfortunately, it increases in 0.1W increments, so it can take awhile to scroll from, say 7W to 75W, but typically, you’ll only be shifting from, say, 30W to 40W.

Kanger CUPTI All-In-One 75W Kit’s Price

You can find the Kanger CUPTI All-In-One 75W for just above $50 on DirectVapor, which is a reasonable price for a mid-sized mod. While it doesn’t have a wattage range that reaches into the triple digits with cutting-edge bluetooth technology, it is a solid, reliable device that is portable and easy to use.

Overall

While there were a few minor flaws, we have almost exclusively positive things to say about the Kanger CUPTI All-In-One 75W. It is a great device for the intermediate vaper because it is an all-in-one device with everything besides the battery and e-juice included, but it has variable wattage and temperature control settings. So, you can begin to take some control over your vaping experience without having to invest too much time or effort. If you are looking to step up your vaping game with something a little bit more powerful, then this could be just the mod for you. Check it out now on DirectVapor to see if it could be your next new vape!

Click for Lowest Price + 5% Off Now!